Re: [net-next PATCH 7/7] net: ixgbe: add support for tc_u32 offload

On 2/3/2016 11:30 PM, Amir Vadai" wrote:

On Wed, Feb 03, 2016 at 01:29:59AM -0800, John Fastabend wrote:

quoted

This adds initial support for offloading the u32 tc classifier. This
initial implementation only implements a few base matches and actions
to illustrate the use of the infrastructure patches.

However it is an interesting subset because it handles the u32 next
hdr logic to correctly map tcp packets from ip headers using the ihl
and protocol fields. After this is accepted we can extend the match
and action fields easily by updating the model header file.

Also only the drop action is supported initially.

Here is a short test script,

 #tc qdisc add dev eth4 ingress
 #tc filter add dev eth4 parent ffff: protocol ip \
	u32 ht 800: order 1 \
	match ip dst 15.0.0.1/32 match ip src 15.0.0.2/32 action drop

<-- hardware has dst/src ip match rule installed -->

 #tc filter del dev eth4 parent ffff: prio 49152
 #tc filter add dev eth4 parent ffff: protocol ip prio 99 \
	handle 1: u32 divisor 1
 #tc filter add dev eth4 protocol ip parent ffff: prio 99 \
	u32 ht 800: order 1 link 1: \
	offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff
 #tc filter add dev eth4 parent ffff: protocol ip \
	u32 ht 1: order 3 match tcp src 23 ffff action drop

<-- hardware has tcp src port rule installed -->

 #tc qdisc del dev eth4 parent ffff:

<-- hardware cleaned up -->

Signed-off-by: John Fastabend <redacted>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    3 
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |    6 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |  196 ++++++++++++++++++++++
 3 files changed, 198 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 4b9156c..09c2d9b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h

[...]

quoted

@@ -8277,6 +8465,7 @@ static int ixgbe_set_features(struct net_device *netdev,
 	 */
 	switch (features & NETIF_F_NTUPLE) {
 	case NETIF_F_NTUPLE:
+	case NETIF_F_HW_TC:
 		/* turn off ATR, enable perfect filters and reset */
 		if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
 			need_reset = true;

I think you have a bug here. I don't see how the NETIF_F_HW_TC case will
happen after masking 'features' out.

Ah I should have annotated this in the commit msg. I turn the feature
off by default to enable it the user needs to run

	# ethtool -K ethx hw-tc-offload on

this is just a habit of mine to leave new features off by default for
a bit until I work out some of the kinks. For example I found a case
today where if you build loops into your u32 graph the hardware tables
can get out of sync with the software tables. This is sort of extreme
corner case not sure if anyone would really use u32 but it is valid
and the hardware should abort correctly.

Thanks,
John