Re: [PATCH] fix e100 rx path on ARM (was [PATCH] e100 rx: or s and el bits)

Kok, Auke wrote:

David Acker wrote:

quoted

David Acker wrote:

quoted

Done.  Below is a patch against 2.6.22-rc1.  It combines removing the s-bit patch and applying the patch I previously sent.

Oops.  I missed one state in that patch.  Since the el-bit buffer will normally not complete due to a zero size, we need to check if the buffer with no data has the el-bit set.  Without this, you have to wait for the interrupt.  Sorry about that...this was in the code I tested on my embedded system but got lost in the regular kernel patch.

OK. Thanks.

If you don't mind I'm going to have some testing on this patch done for a bit now (mostly x86 hardware of course) to see if there's no pitfalls in it. It'll be a few days because of the weekend before I get back on it.

Cool.  I will see if I can get some more tests running over the weekend on our PXA255 platform.

-Ack