Thread (25 messages) 25 messages, 5 authors, 2009-12-14

Re: spi_mpc8xxx.c: chip select polarity problem

From: Grant Likely <hidden>
Date: 2009-11-25 00:34:19

Thanks.  However, there needs to be a proper description of what this
patch does to go in the commit header.  Can you please write one?

Thanks,
g.

On Sat, Nov 21, 2009 at 9:08 AM, Torsten Fleischer
[off-list ref] wrote:
On Sat, Nov 21, 2009 at 09:45:50 Grant Likely wrote:
[...]
quoted
Hey Torsten, =A0do you have an updated version of this change to address
the comments? =A0I'm collecting the last few things for some linux-next
exposure now.
Hey Grant,

here is the updated version of the patch containing the recommended
changes.

Best Regards
Torsten


Signed-off-by: Torsten Fleischer <redacted>
---

diff -u -r -N linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c linux-2.6.31=
.6/drivers/spi/spi_mpc8xxx.c
quoted hunk ↗ jump to hunk
--- linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c =A0 =A0 =A02009-11-10 =
01:32:31.000000000 +0100
quoted hunk ↗ jump to hunk
+++ linux-2.6.31.6/drivers/spi/spi_mpc8xxx.c =A0 =A02009-11-19 08:15:33.0=
00000000 +0100
quoted hunk ↗ jump to hunk
@@ -114,6 +114,7 @@
=A0 =A0 =A0 =A0u32 rx_shift; =A0 =A0 =A0 =A0 =A0 /* RX data reg shift whe=
n in qe mode */
=A0 =A0 =A0 =A0u32 tx_shift; =A0 =A0 =A0 =A0 =A0 /* TX data reg shift whe=
n in qe mode */
=A0 =A0 =A0 =A0u32 hw_mode; =A0 =A0 =A0 =A0 =A0 =A0/* Holds HW mode regis=
ter settings */
quoted hunk ↗ jump to hunk
+ =A0 =A0 =A0 int initialized;
=A0};

=A0static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val)
@@ -503,15 +504,52 @@
=A0 =A0 =A0 =A0return ret;
=A0}
+
+
+struct mpc8xxx_spi_probe_info {
+ =A0 =A0 =A0 struct fsl_spi_platform_data pdata;
+ =A0 =A0 =A0 int *gpios;
+ =A0 =A0 =A0 bool *alow_flags;
+};
+
+static struct mpc8xxx_spi_probe_info *
+to_of_pinfo(struct fsl_spi_platform_data *pdata)
+{
+ =A0 =A0 =A0 return container_of(pdata, struct mpc8xxx_spi_probe_info, p=
data);
+}
+
+static int mpc8xxx_spi_cs_init(struct spi_device *spi)
+{
+ =A0 =A0 =A0 struct device *dev =3D spi->dev.parent;
+ =A0 =A0 =A0 struct mpc8xxx_spi_probe_info *pinfo =3D to_of_pinfo(dev->p=
latform_data);
+ =A0 =A0 =A0 u16 cs =3D spi->chip_select;
+ =A0 =A0 =A0 int gpio =3D pinfo->gpios[cs];
+ =A0 =A0 =A0 bool on =3D pinfo->alow_flags[cs] ^ !(spi->mode & SPI_CS_HI=
GH);
+
+ =A0 =A0 =A0 return gpio_direction_output(gpio, on);
+}
+
=A0static int mpc8xxx_spi_transfer(struct spi_device *spi,
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0struct spi=
_message *m)
=A0{
=A0 =A0 =A0 =A0struct mpc8xxx_spi *mpc8xxx_spi =3D spi_master_get_devdata=
(spi->master);
+ =A0 =A0 =A0 struct spi_mpc8xxx_cs *cs =3D spi->controller_state;
=A0 =A0 =A0 =A0unsigned long flags;

=A0 =A0 =A0 =A0m->actual_length =3D 0;
=A0 =A0 =A0 =A0m->status =3D -EINPROGRESS;

+ =A0 =A0 =A0 if (cs && !cs->initialized) {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 int ret;
+
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 ret =3D mpc8xxx_spi_cs_init(spi);
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (ret) {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 dev_dbg(&spi->dev, "cs_init=
 failed: %d\n", ret);
quoted hunk ↗ jump to hunk
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 return ret;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 cs->initialized =3D 1;
+ =A0 =A0 =A0 }
+
=A0 =A0 =A0 =A0spin_lock_irqsave(&mpc8xxx_spi->lock, flags);
=A0 =A0 =A0 =A0list_add_tail(&m->queue, &mpc8xxx_spi->queue);
=A0 =A0 =A0 =A0queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work);
@@ -648,18 +686,6 @@
=A0 =A0 =A0 =A0return 0;
=A0}

-struct mpc8xxx_spi_probe_info {
- =A0 =A0 =A0 struct fsl_spi_platform_data pdata;
- =A0 =A0 =A0 int *gpios;
- =A0 =A0 =A0 bool *alow_flags;
-};
-
-static struct mpc8xxx_spi_probe_info *
-to_of_pinfo(struct fsl_spi_platform_data *pdata)
-{
- =A0 =A0 =A0 return container_of(pdata, struct mpc8xxx_spi_probe_info, p=
data);
quoted hunk ↗ jump to hunk
-}
-
=A0static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on)
=A0{
=A0 =A0 =A0 =A0struct device *dev =3D spi->dev.parent;
@@ -720,14 +746,6 @@
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0pinfo->gpios[i] =3D gpio;
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0pinfo->alow_flags[i] =3D flags & OF_GPIO_A=
CTIVE_LOW;
-
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 ret =3D gpio_direction_output(pinfo->gpios[=
i],
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
 =A0 =A0 =A0 pinfo->alow_flags[i]);
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (ret) {
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 dev_err(dev, "can't set out=
put direction for gpio "
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "#%d: %d\n"=
, i, ret);
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto err_loop;
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
=A0 =A0 =A0 =A0}

=A0 =A0 =A0 =A0pdata->max_chipselect =3D ngpios;


--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help