January 2008

348 messages across 117 threads. The 100 most recently active threads.

LastThreadReplies
Thursday 31 January
RAID 1 and grub
Richard Scobie
6
which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
Janek Kozicki
5
Re: In this partition scheme, grub does not find md information?
Neil Brown
55
Documentation? failure to update-initramfs causes Infinite md loop on boot
Moshe Yudkowsky
2
problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
Andreas-Sokov
none
Wednesday 30 January
linux raid faq
Keld Jørn Simonsen
3
[PATCH] Use new sb type
Jan Engelhardt
9
Help, big error, dd first GB of a raid:-/
Lars Schimmer
3
Check mdadm-Raid 5
Michael Mott
1
Re: [BUG] The kernel thread for md RAID1 could cause a md RAID1 array deadlock
Neil Brown
2
Tuesday 29 January
Re: 2.6.24-rc6 reproducible raid5 hang
Tim Southerwood
5
How many disks per SATA-II bus?
Bruce Miller
1
Re: write-intent bitmaps
Russell Coker
2
In this partition scheme, grub does not find md information?
Moshe Yudkowsky
none
problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help
Andreas-Sokov
none
Re: BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
Neil Brown
none
Monday 28 January
problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help
Andreas-Sokov
none
Unable to eradicate previous version of device information, even with zero-superblock and dd
Moshe Yudkowsky
1
Re: striping of a 4 drive raid10
Keld Jørn Simonsen
none
Re: striping of a 4 drive raid10
Keld Jørn Simonsen
1
Re: BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
Neil Brown
1
BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
Peter Rabbitson
none
Re: assemble vs create an array.......
Dragos
none
Re: assemble vs create an array.......
Dragos
none
Sunday 27 January
Re: striping of a 4 drive raid10
Neil Brown
none
striping of a 4 drive raid10
Keld Jørn Simonsen
2
Re: striping of a 4 drive raid10
Neil Brown
none
Re: Need clarification on raid1 resync behavior with bitmap support
Neil Brown
1
Re: write-intent bitmaps
Neil Brown
1
write-intent bitmaps
Russell Coker
none
safe mode for grow?
Nagilum
none
Saturday 26 January
question about mdadm
Edward Hourigan
1
raid1, questions and/or ideas for improvement
Markus Hochholdinger
none
Friday 25 January
Error mounting a reiserfs on renamed raid1
Clemens Koller
2
hdparm patch with min/max transfer rate, and min/avg/max access times
Keld Jørn Simonsen
none
The SX4 challenge
Jeff Garzik
4
Thursday 24 January
[PATCH reposted] raid1 load balancing
Samuel Tardieu REVIEWED · 1 review, 0 by maintainers
none
Re: idle array consuming cpu ??!!
Neil Brown
none
Re: idle array consuming cpu ??!!
Neil Brown
5
Wednesday 23 January
Re: Fwd: Error on /dev/sda, but takes down RAID-1
Neil Brown
none
Fwd: Error on /dev/sda, but takes down RAID-1
Martin Seebach
1
performance of raid10,f2 on 4 disks
Keld Jørn Simonsen
none
AACRAID driver broken in 2.6.22.x (and beyond?) [WAS: Re: 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN]
Mike Snitzer
2
identifying failed disk/s in an array.
Michael Harris
3
Re: identifying failed disk/s in an array.
Wolfgang Denk
none
Problem with raid5 grow/resize (not restripe)
Peter Rabbitson
none
Tuesday 22 January
[PATCH] md: constify function pointer tables
Jan Engelhardt
none
One Large md or Many Smaller md for Better Peformance?
Moshe Yudkowsky
10
Raid1, mdadm and nfs that remains in D state
BERTRAND Joël
none
[RFC] A SCSI fault injection framework using SystemTap.
K.Tanaka
4
2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN
Mike Snitzer
1
Monday 21 January
RE: mdadm error when trying to replace a failed drive in RAID5 array
Steve Fairbairn
1
raid10 messed up filesystem, lvm lv ok
Ask Bjørn Hansen
1
Re: array doesn't run even with --force
Neil Brown
1
Re: array doesn't run even with --force
Neil Brown
1
Sunday 20 January
idle array consuming cpu ??!!
Carlos Carvalho
none
array doesn't run even with --force
Carlos Carvalho
none
how to create a degraded raid1 with only 1 of 2 drives ??
Mitchell Laks
4
mdadm error when trying to replace a failed drive in RAID5 array
Steve Fairbairn
1
RE: mdadm error when trying to replace a failed drive in RAID5 array
Steve Fairbairn
none
Performance of RAID 10 vs. using LVM?
Moshe Yudkowsky
none
Saturday 19 January
Raid 5 Wiederherstellung
Berny
none
Raid over 48 disks ... for real now
Norman Elton
6
Friday 18 January
3ware and dmraid - duplicate serial numbers (!)
Ask Bjørn Hansen
3
Linux Software RAID 5 + XFS Multi-Benchmarks / 10 Raptors Again
Justin Piszcz
14
[PATCH 000 of 4] md: assorted md patched - please read carefully.
NeilBrown
4
Thursday 17 January
Re: do_md_run returned -22 [Was: 2.6.24-rc8-mm1]
Neil Brown
none
do_md_run returned -22 [Was: 2.6.24-rc8-mm1]
Jiri Slaby
1
Incompatibility between Linux and Windows
Leopoldo Ghielmetti
none
Re: How do I get rid of old device?
Neil Brown
1
Wednesday 16 January
How do I get rid of old device?
Justin Piszcz
1
Re: [PATCH 001 of 6] md: Fix an occasional deadlock in raid5
Neil Brown
none
(no subject)
Jed Davidow
none
[PATCH 000 of 6] md: various fixes for md
NeilBrown
12
Tuesday 15 January
[BUG] The kernel thread for md RAID1 could cause a md RAID1 array deadlock
K.Tanaka
none
Monday 14 January
Replacing an active drive.
Greg Cormier
none
Re: [PATCH 002 of 6] md: Fix use-after-free bug when dropping an rdev from an md array.
Neil Brown
2
Re: [PATCH 002 of 6] md: Fix use-after-free bug when dropping an rdev from an md array.
Neil Brown
none
Re: [PATCH 002 of 6] md: Fix use-after-free bug when dropping an rdev from an md array.
Neil Brown
1
Friday 11 January
Re: PROBLEM: RAID5 reshape data corruption
Nagilum
2
The effects of multiple layers of block drivers
Dennison Williams
1
Re: 2.6.24-rc6 reproducible raid5 hang
Neil Brown
1
Re: The effects of multiple layers of block drivers
Neil Brown
none
Re: md rotates RAID5 spare at boot
Neil Brown
none
Re: md rotates RAID5 spare at boot
Neil Brown
1
Re: md rotates RAID5 spare at boot
Neil Brown
none
Thursday 10 January
Re: md rotates RAID5 spare at boot
Neil Brown
2
Re: raid5 stuck in degraded, inactive and dirty mode
Neil Brown
1
md rotates RAID5 spare at boot
Jed Davidow
4
Re: 2.6.24-rc6 reproducible raid5 hang
Neil Brown
2
Re: 2.6.24-rc6 reproducible raid5 hang
Neil Brown
4
Re: raid5 stuck in degraded, inactive and dirty mode
Neil Brown
2
Re: Raid 1, can't get the second disk added back in.
Neil Brown
2
Wednesday 9 January
trouble with mega-raid 150 and considering other alternatives
Eric S. Johansson
none
2.6.24-rc6 reproducible raid5 hang
dean gaudet
1
raid5 stuck in degraded, inactive and dirty mode
CaT
none
Tuesday 8 January
Re: Raid 1, new disk can't be added after replacing faulty disk
Neil Brown
2
Raid level 5 not permitted with --build
Daniel Browning
none
Re: Is that normal a removed part in RAID0 still showed as "active sync"
Neil Brown
1
Re: Why "mdadm --monitor --program" sometimes only gives 2 command-line arguments to the program?
Neil Brown
none
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help