Why do I get the following error when I attempt to 'mdadm --build' a
software RAID 5 array that was created in Windows 2003 using Dynamic Disks
(LDM)?
Raid level 5 not permitted with --build
RAID-0 arrays work great, and some of the kernel documentation implies that
RAID-5 should work too:
Documentation/ldm.txt:
Once the LDM driver has divided up the disk, you can use the MD driver to
assemble any multi-partition volumes, e.g. Stripes, RAID5.
Documentation/filesystems/ntfs.txt:
Using NTFS volume and stripe sets
=================================
For support of volume and stripe sets, you can either use the kernel's
Device-Mapper driver or the kernel's Software RAID / MD driver. The
former is the recommended one to use for linear raid. But the latter is
required for raid level 5. For striping and mirroring, either driver
should work fine.
I'm using 2.6.23.12 vanilla, CONFIG_LDM_PARTITION=y, mdadm v2.6.2,
ntfs-3g-1.1120, Fedora Core 8.
My goal is to access the same 6-disk 5TB RAID-5 array when booting Windows
or Linux. I need Windows for professional video editing software like Avid
and PPro that will not appear on Linux any time soon.
Hardware raid is not needed for the performance or lower CPU utilization;
I'm already getting 400 MB/s at 25% of one core. 8-port cards are $$$$.
Fakeraid does not seem to be a good solution either; I could not find any
high-quality implementations supported equally well by dmraid and Windows.
A virtual machine in Windows with Linux, mdadm, and Samba would work, but
would be too slow.
Sincerely,
--
Daniel Browning
End Point Corporation
http://www.endpoint.com/