Re: [PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name properties
From: Rob Herring <robh@kernel.org>
Date: 2021-10-18 19:18:20
Also in:
linux-arm-kernel, linux-devicetree, lkml
On Tue, Oct 12, 2021 at 04:41:15PM +0800, Richard Zhu wrote:
quoted hunk ↗ jump to hunk
i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties in the binding document. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2911e565b260..99d9863a69cd 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml@@ -128,6 +128,12 @@ properties: enum: [1, 2, 3, 4] default: 1 + phys: + description: Phandle of the Generic PHY to the PCIe PHY.
maxItems: 1 And drop 'description'
+
+ phy-names:
+ const: pcie-phy
+
reset-gpio:
description: Should specify the GPIO for controlling the PCI bus device
reset signal. It's not polarity aware and defaults to active-low reset
--
2.25.1
-- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy