[PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy support
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: 2021-10-12 09:06:15
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add the PCIe PHY support on iMX8MM platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..ac5d11466608 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi@@ -1135,6 +1135,19 @@ usbmisc2: usbmisc@32e50200 { reg = <0x32e50200 0x200>; }; + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mm-pcie-phy"; + reg = <0x32f00000 0x10000>; + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + assigned-clock-rates = <100000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; + resets = <&src IMX8MQ_RESET_PCIEPHY>; + reset-names = "pciephy"; + #phy-cells = <0>; + status = "disabled"; + }; }; dma_apbh: dma-controller@33000000 {
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy