On 2026-01-07 15:03, Konrad Dybcio wrote:

On 1/7/26 2:31 PM, Barnabás Czémán wrote:

quoted

Document ovp values supported by wled found in PMI8950.

Signed-off-by: Barnabás Czémán <redacted>
---
 .../bindings/leds/backlight/qcom-wled.yaml           | 20 
++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git 

a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml 
b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index a8490781011d..306fb6642617 100644

--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml

@@ -98,8 +98,6 @@ properties:
     description: |
       Over-voltage protection limit. This property is for WLED4 only.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 18100, 19600, 29600, 31100 ]
-    default: 29600

   qcom,num-strings:
     description: |

@@ -239,6 +237,24 @@ allOf:
           minimum: 0
           maximum: 4095

+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi8950-wled
+
+    then:
+      properties:
+        qcom,ovp-millivolt:
+          enum: [ 17800, 19400, 29500, 31000 ]
+          default: 29500
+
+    else:
+      properties:
+        qcom,ovp-millivolt:
+          enum: [ 18100, 19600, 29600, 31100 ]
+          default: 29600

Out of the supported ones:

{ .compatible = "qcom,pmi8950-wled", .data = (void *)4 },
{ .compatible = "qcom,pmi8994-wled", .data = (void *)4 },
{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },

I can confirm both allowed and default values for PMI8950/98/PM660L

I could not find any data for PMI8994 (or PMI8996, the essentially
PMI8994-revbump), but it's very probable that 8950 is an oddball,

This commits add support for pmi8998 and documentation is telling which 
PMIC supports which values:
https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/commit/7a1b6d0276828f270180db40935bb034a3470865
TLDR:
- qcom,ovp-mv		: Over voltage protection threshold in mV. Default is
			  29500. Supported values are:
			  - 31000, 29500, 19400, 17800 for pmi8994/8952/8996. (As far as i 
know 8952=8950)
			  - 31100, 29600, 19600, 18100 for pmicobalt/pm2falcon 
(pmi8998/pm660l)

so:

Reviewed-by: Konrad Dybcio <redacted>

Konrad