On 1/7/26 2:31 PM, Barnabás Czémán wrote:
quoted hunk ↗ jump to hunk
Document ovp values supported by wled found in PMI8950.
Signed-off-by: Barnabás Czémán <redacted>
---
.../bindings/leds/backlight/qcom-wled.yaml | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index a8490781011d..306fb6642617 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -98,8 +98,6 @@ properties:
description: |
Over-voltage protection limit. This property is for WLED4 only.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 18100, 19600, 29600, 31100 ]
- default: 29600
qcom,num-strings:
description: |@@ -239,6 +237,24 @@ allOf:
minimum: 0
maximum: 4095
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pmi8950-wled
+
+ then:
+ properties:
+ qcom,ovp-millivolt:
+ enum: [ 17800, 19400, 29500, 31000 ]
+ default: 29500
+
+ else:
+ properties:
+ qcom,ovp-millivolt:
+ enum: [ 18100, 19600, 29600, 31100 ]
+ default: 29600
Out of the supported ones:
{ .compatible = "qcom,pmi8950-wled", .data = (void *)4 },
{ .compatible = "qcom,pmi8994-wled", .data = (void *)4 },
{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },
I can confirm both allowed and default values for PMI8950/98/PM660L
I could not find any data for PMI8994 (or PMI8996, the essentially
PMI8994-revbump), but it's very probable that 8950 is an oddball,
so:
Reviewed-by: Konrad Dybcio <redacted>
Konrad