On Sun, 5 Jan 2020 23:50:00 +0100, Luca Ceresoli wrote:
quoted hunk ↗ jump to hunk
Use the proper ACK and NACK naming from the I2C specification instead of
"accept" and "reverse accept".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
Documentation/i2c/smbus-protocol.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index fbadd4d25ad5..10c4a989982c 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -38,7 +38,7 @@ Key to symbols
S Start condition
P Stop condition
Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) Accept and reverse accept bit.
+A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
Comm (8 bits) Command byte, a data byte which often selects a register on
Reviewed-by: Jean Delvare <redacted>
--
Jean Delvare
SUSE L3 Support