[PATCH 10/26] docs: i2c: i2c-protocol: use proper names for ACK and NACK
From: Luca Ceresoli <luca@lucaceresoli.net>
Date: 2020-01-05 22:51:24
Also in:
linux-i2c, lkml
Subsystem:
i2c subsystem, the rest · Maintainers:
Andi Shyti, Linus Torvalds
Use the proper ACK and NACK naming from the I2C specification instead of "accept" and "reverse accept". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> --- Documentation/i2c/i2c-protocol.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 66adac3a5afd..9a4ac944cf9d 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst@@ -11,7 +11,7 @@ Key to symbols S Start condition P Stop condition Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0. -A, NA (1 bit) Accept and reverse accept bit. +A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to get a 10 bit I2C address. Comm (8 bits) Command byte, a data byte which often selects a register on
--
2.24.1