On Sun, 5 Jan 2020 23:49:58 +0100, Luca Ceresoli wrote:
quoted hunk ↗ jump to hunk
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
Documentation/i2c/smbus-protocol.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 1600b09ec0be..8510eeda1dd0 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -35,8 +35,8 @@ Key to symbols
==============
=============== =============================================================
-S (1 bit) : Start bit
-P (1 bit) : Stop bit
+S : Start condition
+P : Stop condition
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) : Accept and reverse accept bit.
Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
Reviewed-by: Jean Delvare <redacted>
--
Jean Delvare
SUSE L3 Support