Re: [PATCH 12/17] arm64: dts: renesas: rzg3s-smarc-som: Guard the ethernet IRQ GPIOs with proper flags

On 16.02.2024 16:17, Geert Uytterhoeven wrote:

Hi Claudiu,

On Thu, Feb 8, 2024 at 1:44 PM Claudiu [off-list ref] wrote:

quoted

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Ethernet IRQ GPIOs are marked as gpio-hog. Thus, these GPIOs are requested
at probe w/o considering if there are other peripherals that needs them.
The Ethernet IRQ GPIOs are shared w/ SDHI2. Selection b/w Ethernet and
SDHI2 is done through a hardware switch. To avoid scenarios where one wants
to boot with SDHI2 support and some SDHI pins are not propertly configured
because of gpio-hog guard Ethernet IRQ GPIO with proper build flag.

Fixes: 932ff0c802c6 ("arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch! (which was well-hidden between non-fixes ;-)

Sorry about that.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.9.

As Ethernet is enabled by default, I think there is no need to fast-track
this for v6.8.

Right!

Thank you,
Claudiu Beznea

Gr{oetje,eeting}s,

                        Geert