RE: [PATCH 01/17] dt-bindings: clock: r9a07g043-cpg: Add power domain IDs

-----Original Message-----
From: claudiu beznea <claudiu.beznea@tuxon.dev>
Sent: Thursday, February 8, 2024 3:46 PM
Subject: Re: [PATCH 01/17] dt-bindings: clock: r9a07g043-cpg: Add power
domain IDs

Hi, Biju,

On 08.02.2024 16:30, Biju Das wrote:

quoted

Hi Claudiu,

Thanks for the patch.

quoted

-----Original Message-----
From: Claudiu <claudiu.beznea@tuxon.dev>
Sent: Thursday, February 8, 2024 12:43 PM
Subject: [PATCH 01/17] dt-bindings: clock: r9a07g043-cpg: Add power
domain IDs

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add power domain IDs for RZ/G2UL (R9A07G043) SoC.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 include/dt-bindings/clock/r9a07g043-cpg.h | 48
+++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-

bindings/clock/r9a07g043-cpg.h index 77cde8effdc7..eabfeec7ac37
100644

--- a/include/dt-bindings/clock/r9a07g043-cpg.h
+++ b/include/dt-bindings/clock/r9a07g043-cpg.h

@@ -200,5 +200,53 @@
 #define R9A07G043_AX45MP_CORE0_RESETN	78	/* RZ/Five Only */
 #define R9A07G043_IAX45_RESETN		79	/* RZ/Five Only */

+/* Power domain IDs. */
+#define R9A07G043_PD_ALWAYS_ON		0
+#define R9A07G043_PD_GIC		1
+#define R9A07G043_PD_IA55		2
+#define R9A07G043_PD_MHU		3
+#define R9A07G043_PD_CORESIGHT		4
+#define R9A07G043_PD_SYC		5
+#define R9A07G043_PD_DMAC		6
+#define R9A07G043_PD_GTM0		7
+#define R9A07G043_PD_GTM1		8
+#define R9A07G043_PD_GTM2		9
+#define R9A07G043_PD_MTU		10
+#define R9A07G043_PD_POE3		11
+#define R9A07G043_PD_WDT0		12
+#define R9A07G043_PD_SPI		13
+#define R9A07G043_PD_SDHI0		14
+#define R9A07G043_PD_SDHI1		15
+#define R9A07G043_PD_ISU		16
+#define R9A07G043_PD_CRU		17
+#define R9A07G043_PD_LCDC		18
+#define R9A07G043_PD_SSI0		19
+#define R9A07G043_PD_SSI1		20
+#define R9A07G043_PD_SSI2		21
+#define R9A07G043_PD_SSI3		22
+#define R9A07G043_PD_SRC		23
+#define R9A07G043_PD_USB0		24
+#define R9A07G043_PD_USB1		25
+#define R9A07G043_PD_USB_PHY		26
+#define R9A07G043_PD_ETHER0		27
+#define R9A07G043_PD_ETHER1		28
+#define R9A07G043_PD_I2C0		29
+#define R9A07G043_PD_I2C1		30
+#define R9A07G043_PD_I2C2		31
+#define R9A07G043_PD_I2C3		32
+#define R9A07G043_PD_SCIF0		33
+#define R9A07G043_PD_SCIF1		34
+#define R9A07G043_PD_SCIF2		35
+#define R9A07G043_PD_SCIF3		36
+#define R9A07G043_PD_SCIF4		37
+#define R9A07G043_PD_SCI0		38
+#define R9A07G043_PD_SCI1		39
+#define R9A07G043_PD_IRDA		40
+#define R9A07G043_PD_RSPI0		41
+#define R9A07G043_PD_RSPI1		42
+#define R9A07G043_PD_RSPI2		43
+#define R9A07G043_PD_CANFD		44
+#define R9A07G043_PD_ADC		45
+#define R9A07G043_PD_TSU		46

Not sure from "Table 42.3 Registers for Module Standby Mode"

Power domain ID has to be based on CPG_BUS_***_MSTOP or CPG_CLKON_***
As former reduces number of IDs??

If I understand correctly your point here, you want me to describe PM
domain in DT with something like:

power-domains = <&cpg CPG_BUS_X_MSTOP>;

MSTOP bits are distinct for each IP.

<&cpg CPG_BUS_MCPU1_MSTOP x>; x =1..9

2=MTU IP

4= GPT

etc...

Is it something work??

where X={ACPU, PERI_CPU, PERI_CPU2, REG0, REG1} ?

With this, I still see the necessity of a 3rd identifier that will be IP
specific to be able to uniquely match b/w DT description and registered
power domain. FMPOV, this will lead to a more complicated implementation.

We need a unique ID that the pm domain xlate will use to xlate the DT
binding to driver data structures.

Ok.

Cheers,
Biju