Re: [PATCH v4 5/7] net: stmmac: Add glue layer for StarFive JH7110 SoCs

add  samin.guo@starfivetech.com  to loop.

On 2023/2/16 18:53, Emil Renner Berthing wrote:

On Wed, 18 Jan 2023 at 07:20, Yanhong Wang
[off-list ref] wrote:

quoted

This adds StarFive dwmac driver support on the StarFive JH7110 SoCs.

Signed-off-by: Yanhong Wang <redacted>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 MAINTAINERS                                   |   1 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../stmicro/stmmac/dwmac-starfive-plat.c      | 118 ++++++++++++++++++
 4 files changed, 132 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 56be59bb09f7..5b50b52d3dbb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -19609,6 +19609,7 @@ F:      include/dt-bindings/clock/starfive*
 STARFIVE DWMAC GLUE LAYER
 M:     Yanhong Wang <yanhong.wang@starfivetech.com>
 S:     Maintained
+F:     Documentation/devicetree/bindings/net/dwmac-starfive-plat.c
 F:     Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml

 STARFIVE PINCTRL DRIVER

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 31ff35174034..f9a4ad4abd54 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -235,6 +235,18 @@ config DWMAC_INTEL_PLAT
          the stmmac device driver. This driver is used for the Intel Keem Bay
          SoC.

+config DWMAC_STARFIVE_PLAT
+       tristate "StarFive dwmac support"
+       depends on OF && COMMON_CLK
+       depends on STMMAC_ETH
+       default SOC_STARFIVE
+       help
+         Support for ethernet controllers on StarFive RISC-V SoCs
+
+         This selects the StarFive platform specific glue layer support for
+         the stmmac device driver. This driver is used for StarFive JH7110
+         ethernet controller.
+
 config DWMAC_VISCONTI
        tristate "Toshiba Visconti DWMAC support"
        default ARCH_VISCONTI

diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index d4e12e9ace4f..a63ab0ab5071 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_DWMAC_DWC_QOS_ETH)       += dwmac-dwc-qos-eth.o
 obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o
 obj-$(CONFIG_DWMAC_GENERIC)    += dwmac-generic.o
 obj-$(CONFIG_DWMAC_IMX8)       += dwmac-imx.o
+obj-$(CONFIG_DWMAC_STARFIVE_PLAT)      += dwmac-starfive-plat.o

Hi Yanhong,

For the next version could you please drop the _PLAT from the config
symbol and -plat from filename. I know the intel wrapper does the
same, but it's the only one, so lets do like the majority of other
wrappers and not add more different ways of doing things.

Thanks. I will fix.

quoted

 obj-$(CONFIG_DWMAC_VISCONTI)   += dwmac-visconti.o
 stmmac-platform-objs:= stmmac_platform.o
 dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c
new file mode 100644
index 000000000000..e441d920933a
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive DWMAC platform driver
+ *
+ * Copyright(C) 2022 StarFive Technology Co., Ltd.
+ *
+ */
+
+#include <linux/of_device.h>
+
+#include "stmmac_platform.h"
+
+struct starfive_dwmac {
+       struct device *dev;
+       struct clk *clk_tx;
+       struct clk *clk_gtx;
+       struct clk *clk_gtxc;
+};

I like this name. For the next version could you also
s/starfive_eth_plat_/starfive_dwmac_/ on the function/struct names
below for consistency.

I will fix.

quoted

+
+static void starfive_eth_plat_fix_mac_speed(void *priv, unsigned int speed)
+{
+       struct starfive_dwmac *dwmac = priv;
+       unsigned long rate;
+       int err;
+
+       rate = clk_get_rate(dwmac->clk_gtx);
+
+       switch (speed) {
+       case SPEED_1000:
+               rate = 125000000;
+               break;
+       case SPEED_100:
+               rate = 25000000;
+               break;
+       case SPEED_10:
+               rate = 2500000;
+               break;
+       default:
+               dev_err(dwmac->dev, "invalid speed %u\n", speed);
+               break;
+       }
+
+       err = clk_set_rate(dwmac->clk_gtx, rate);
+       if (err)
+               dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
+}
+
+static int starfive_eth_plat_probe(struct platform_device *pdev)
+{
+       struct plat_stmmacenet_data *plat_dat;
+       struct stmmac_resources stmmac_res;
+       struct starfive_dwmac *dwmac;
+       int err;
+
+       err = stmmac_get_platform_resources(pdev, &stmmac_res);
+       if (err)
+               return err;
+
+       plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+       if (IS_ERR(plat_dat)) {
+               dev_err(&pdev->dev, "dt configuration failed\n");
+               return PTR_ERR(plat_dat);
+       }
+
+       dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+       if (!dwmac)
+               return -ENOMEM;
+
+       dwmac->clk_tx = devm_clk_get_enabled(&pdev->dev, "tx");
+       if (IS_ERR(dwmac->clk_tx))
+               return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
+                                               "error getting tx clock\n");
+
+       dwmac->clk_gtx = devm_clk_get_enabled(&pdev->dev, "gtx");
+       if (IS_ERR(dwmac->clk_gtx))
+               return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtx),
+                                               "error getting gtx clock\n");
+
+       dwmac->clk_gtxc = devm_clk_get_enabled(&pdev->dev, "gtxc");
+       if (IS_ERR(dwmac->clk_gtxc))
+               return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtxc),
+                                               "error getting gtxc clock\n");
+
+       dwmac->dev = &pdev->dev;
+       plat_dat->fix_mac_speed = starfive_eth_plat_fix_mac_speed;
+       plat_dat->init = NULL;
+       plat_dat->bsp_priv = dwmac;
+       plat_dat->dma_cfg->dche = true;
+
+       err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+       if (err) {
+               stmmac_remove_config_dt(pdev, plat_dat);
+               return err;
+       }
+
+       return 0;
+}
+
+static const struct of_device_id starfive_eth_plat_match[] = {
+       { .compatible = "starfive,jh7110-dwmac" },
+       { }
+};
+
+static struct platform_driver starfive_eth_plat_driver = {
+       .probe  = starfive_eth_plat_probe,
+       .remove = stmmac_pltfr_remove,
+       .driver = {
+               .name = "starfive-eth-plat",
+               .pm = &stmmac_pltfr_pm_ops,
+               .of_match_table = starfive_eth_plat_match,
+       },
+};
+
+module_platform_driver(starfive_eth_plat_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("StarFive DWMAC platform driver");
+MODULE_AUTHOR("Yanhong Wang [off-list ref]");
--
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv