[PATCH 1/6] dt-bindings: imx6q-pcie: add compatible for IMX8MM support
From: Tim Harvey <tharvey@gateworks.com>
Date: 2021-07-23 20:50:11
Also in:
linux-arm-kernel, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
This adds the DT binding for IMX8MM support to the existing imx6q-pcie driver which shares most functionality with the IMX8MM. Additionally a 'fsl,ext-osc' property is defined to note use of an external oscillator as ref clock vs the internal PLL. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index d8971ab99274..9886e1344fd3 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt@@ -10,6 +10,7 @@ Required properties: - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" - "fsl,imx8mq-pcie" + - "fsl,imx8mm-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property.
@@ -19,6 +20,7 @@ Required properties: - "pcie_phy" Optional properties: +- fsl,ext-osc: use the external oscillator as ref clock (vs internal PLL) - fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 - fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 - fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
@@ -49,7 +51,7 @@ Additional required properties for imx6sx-pcie: PCIE_PHY power domains - power-domain-names: Must be "pcie", "pcie_phy" -Additional required properties for imx7d-pcie and imx8mq-pcie: +Additional required properties for imx7d-pcie, imx8mq-pcie, imx8mm-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block
--
2.17.1