On Mon, Jul 12, 2021 at 04:06:24PM +0300, alexandru.tachici@analog.com wrote:

From: Alexandru Tachici <redacted>

The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for
industrial Ethernet applications and is compliant with the IEEE 802.3cg
Ethernet standard for long reach 10 Mb/s Single Pair Ethernet.

Ethtool output:
        Settings for eth1:
        Supported ports: [ TP	 MII ]
        Supported link modes:   10baseT1L/Full
                                2400mv
                                1000mv

The SI unit of voltage is V not v, so milli-volts is mV not mv. Surely,
at the very least, we should be using the SI designation in user
visible strings?

It may also be worth providing a brief description of 10BASE-T1L in the
cover letter so (e.g.) one doesn't have to look up the fact that the
voltage level is negotiated via bit 13 of the base page. I've found
that by searching google and finding dp83td510e.pdf

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!