[PATCH v4 2/2] dt-bindings: power: add bindings for sbs-charger
From: Nicolas Saenz Julienne <hidden>
Date: 2016-12-20 15:31:40
Also in:
linux-pm, lkml
Subsystem:
open firmware and flattened device tree bindings, power supply class/subsystem and drivers, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sebastian Reichel, Linus Torvalds
Adds device tree documentation for SBS charger compilant devices as defined here: http://sbs-forum.org/specs/sbc110.pdf Signed-off-by: Nicolas Saenz Julienne <redacted> --- v3 -> v4: - use part-number/fallback compatible string structure v2 -> v3: - add part number as compatible .../bindings/power/supply/sbs_sbs-charger.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000..a371962
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt@@ -0,0 +1,23 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties: + - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + };
--
2.7.4