[PATCH 2/2] dt-bindings: power: add bindings for sbs-charger
From: Nicolas Saenz Julienne <hidden>
Date: 2016-11-23 11:21:11
Also in:
linux-pm, lkml
Subsystem:
open firmware and flattened device tree bindings, power supply class/subsystem and drivers, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sebastian Reichel, Linus Torvalds
Adds device tree documentation for SBS charger compilant devices as defined here: http://sbs-forum.org/specs/sbc110.pdf Signed-off-by: Nicolas Saenz Julienne <redacted> --- .../bindings/power/supply/sbs_sbs-charger.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000..b18ee2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt@@ -0,0 +1,22 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties : + - compatible : "sbs,sbs-charger" + +Optional properties : +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; +
--
2.7.4