Add a property for defining the device outputs the LED
represented by the DT child node is connected to.

Signed-off-by: Jacek Anaszewski <redacted>
Acked-by: Kyungmin Park <redacted>
Cc: Bryan Wu <redacted>
Cc: Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>
Cc: Rob Herring <redacted>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <redacted>
Cc: Ian Campbell <redacted>
Cc: Kumar Gala <redacted>
---
 Documentation/devicetree/bindings/leds/common.txt |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index a2c3f7a..29295bf 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt

@@ -1,6 +1,10 @@
 Common leds properties.

 Optional properties for child nodes:
+- led-sources : Array of bits signifying the LED current regulator outputs the
+               LED represented by the child node is connected to (1 - the LED
+               is connected to the output, 0 - the LED isn't connected to the
+               output).

 - label : The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).

@@ -33,6 +37,7 @@ system-status {

 camera-flash {
        label = "Flash";
+       led-sources = <1 0>;
        max-microamp = <50000>;
        flash-max-microamp = <320000>;
        flash-timeout-us = <500000>;
--

1.7.9.5