RE: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: 2024-08-22 16:59:34
Also in:
linux-clk, linux-devicetree, linux-phy, linux-pm, linux-renesas-soc, linux-usb, lkml
Hi Claudiu,
-----Original Message----- From: Claudiu <claudiu.beznea@tuxon.dev> Sent: Thursday, August 22, 2024 4:28 PM Subject: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Add support for RZ/G3S SoC. It needs its own compatible as it uses 2 reset signals and it cannot work w/o both of them. To be able to fully validate this on DT schema, too, the RZ/G3S uses it's own compatible w/o a fallback (as if the fallback will be used the RZ/G3S will not work anyway).
Other than reset/ power domain approach for handling USBPWRRDY signal Can't USBPWRRDY signal handled in SYSC driver directly? Since SYSC driver init happens at very early boot stage Check for USBPHY control device availability and handle USBPWRRDY signal there?? Cheers, Biju
quoted hunk ↗ jump to hunk
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> --- drivers/reset/reset-rzg2l-usbphy-ctrl.c | 1 + 1 file changed, 1 insertion(+)diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c index 8b64c12f3bec..08b18d7de7ad 100644 --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c@@ -93,6 +93,7 @@ static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { { .compatible = "renesas,rzg2l-usbphy-ctrl" }, + { .compatible = "renesas,r9a08g045-usbphy-ctrl" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); --2.39.2