[PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add support for RZ/G3S SoC. It needs its own compatible as it uses 2
reset signals and it cannot work w/o both of them. To be able to
fully validate this on DT schema, too, the RZ/G3S uses it's own compatible
w/o a fallback (as if the fallback will be used the RZ/G3S will not work
anyway).

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index 8b64c12f3bec..08b18d7de7ad 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c

@@ -93,6 +93,7 @@ static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
 
 static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
 	{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
+	{ .compatible = "renesas,r9a08g045-usbphy-ctrl" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);

-- 
2.39.2