Hi Jerome,
	Thank you for your reply.

On 2022/9/28 23:27, Jerome Brunet wrote:

[ EXTERNAL EMAIL ]


On Wed 21 Sep 2022 at 16:40, Yu Tu [off-list ref] wrote:

quoted

Hi Jerome，

On 2022/8/30 15:37, Yu Tu wrote:

quoted

On 2022/8/30 14:44, Jerome Brunet wrote:

quoted

[ EXTERNAL EMAIL ]


On Tue 30 Aug 2022 at 14:13, Yu Tu [off-list ref] wrote:

quoted

On 2022/8/29 17:48, Jerome Brunet wrote:

quoted

[ EXTERNAL EMAIL ]
On Mon 15 Aug 2022 at 21:20, Yu Tu [off-list ref] wrote:

quoted

quoted

quoted

quoted

+
+static struct clk_regmap s4_hdmi_pll_dco = {
+    .data = &(struct meson_clk_pll_data){
+        .en = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL0,
+            .shift   = 28,
+            .width   = 1,
+        },
+        .m = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL0,
+            .shift   = 0,
+            .width   = 8,
+        },
+        .n = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL0,
+            .shift   = 10,
+            .width   = 5,
+        },
+        .frac = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL1,
+            .shift   = 0,
+            .width   = 17,
+        },
+        .l = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL0,
+            .shift   = 31,
+            .width   = 1,
+        },
+        .rst = {
+            .reg_off = ANACTRL_HDMIPLL_CTRL0,
+            .shift   = 29,
+            .width   = 1,
+        },
+    },
+    .hw.init = &(struct clk_init_data){
+        .name = "hdmi_pll_dco",
+        .ops = &meson_clk_pll_ro_ops,
+        .parent_data = (const struct clk_parent_data []) {
+            { .fw_name = "xtal", }
+        },
+        .num_parents = 1,
+        /*
+         * Display directly handle hdmi pll registers ATM, we need
+         * NOCACHE to keep our view of the clock as accurate as
+         * possible
+         */

Is it really ?

Given that HDMI support for the s4 is there yet, the
addresses have changes and the region is no longer a syscon, it is
time
for the HDMI driver to get fixed.

The HDMI PLL is configured in the Uboot phase and does not change the
frequency in the kernel phase. So we use the NOCACHE flag and
"ro_ops".

That's no reason to put NOCACHE or ro-ops
If you want the frequencies to be statically assinged, the correct way
would be through assigned-rate in DT I guess.

Okay. You're right. However, when registering with OPS, HDMI PLL will be
reset. It takes time for PLL to stabilize the output frequency, which
will
lead to the startup screen flashing.

I would like to know how to solve this problem if not using ro_ops.

quoted

You can add new ops or tweak the current init function.

HDMI PLL is not different from other PLLS, so I think adding OPS is
weird.

quoted

Safest would be to do the following :
   * Check if the PLLs is already on.
   * Check if the 'pll->init_regs' matches what is already set
     - if so, you can skip the reset
     - if not, you need to reset as usual

static int meson_clk_pll_init(struct clk_hw *hw)
{
          struct clk_regmap *clk = to_clk_regmap(hw);
          struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
          if (pll->init_count) {
                  meson_parm_write(clk->map, &pll->rst, 1);
                  regmap_multi_reg_write(clk->map, pll->init_regs,
                                  |      pll->init_count);
                  meson_parm_write(clk->map, &pll->rst, 0);
          }
          return 0;
}
Because the init function looks like this. Therefore, HDMI PLL init_count
is not given.

I don't get the remark. You've got pll->init_count right there.

quoted

quoted

Can I change it like this?

What change ? The function above looks a lot like  meson_clk_pll_init()
in the actual source

quoted

I don't know if this change meets your requirements? Please give us your
valuable advice.

What change ?

static struct clk_regmap s4_hdmi_pll_dco = { 

         .data = &(struct meson_clk_pll_data){ 

                 .en = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL0, 

                         .shift   = 28, 

                         .width   = 1, 

                 }, 

                 .m = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL0, 

                         .shift   = 0, 

                         .width   = 8, 

                 }, 

                 .n = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL0, 

                         .shift   = 10, 

                         .width   = 5, 

                 }, 

                 .frac = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL1, 

                         .shift   = 0, 

                         .width   = 17, 

                 }, 

                 .l = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL0, 

                         .shift   = 31, 

                         .width   = 1, 

                 }, 

                 .rst = { 

                         .reg_off = ANACTRL_HDMIPLL_CTRL0, 

                         .shift   = 29, 

                         .width   = 1, 

                 }, 

                 .range = &s4_gp0_pll_mult_range, 

         }, 

         .hw.init = &(struct clk_init_data){ 

                 .name = "hdmi_pll_dco", 

                 .ops = &meson_clk_pll_ops, 

                 .parent_data = (const struct clk_parent_data []) { 

                         { .fw_name = "xtal", } 

                 }, 

                 .num_parents = 1, 

         }, 

};

This is my code right now. Because init_count and init_regs are not 
defined, HDMI PLL is not reset. In this way, the kernel will not blink 
when the Uboot starts. Then in the kernel stage, if we want to change 
the HDMI PLL frequency value, we can directly change M, N and OD. In 
fact, we will not change the HDMI PLL frequency value later.

I wonder if you accept this change?




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel