Thread (37 messages) 37 messages, 3 authors, 2022-10-24

Re: [PATCH V3 2/6] arm64: dts: meson: add S4 Soc PLL clock controller in DT

From: Yu Tu <hidden>
Date: 2022-08-15 06:17:58
Also in: linux-amlogic, linux-clk, linux-devicetree, lkml

Hi Jerome,

On 2022/8/10 21:32, Jerome Brunet wrote:
[ EXTERNAL EMAIL ]


On Fri 05 Aug 2022 at 17:39, Yu Tu [off-list ref] wrote:
quoted
Hi Krzysztof,
     Thank you for your reply.

On 2022/8/5 17:16, Krzysztof Kozlowski wrote:
quoted
[ EXTERNAL EMAIL ]
On 05/08/2022 10:57, Yu Tu wrote:
quoted
Added information about the S4 SOC PLL Clock controller in DT.

Signed-off-by: Yu Tu <redacted>
---
   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++
   1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ff213618a598..a816b1f7694b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -92,6 +92,14 @@ apb4: apb4@fe000000 {
   			#size-cells = <2>;
   			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
   +			clkc_pll: pll-clock-controller@8000 {
Node names should be generic - clock-controller.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
I will change to clkc_pll: clock-controller@8000, in next version.
Same comment applies to the binding doc.
OKay.
Also it would be nice to split this in two series.
Bindings and drivers in one, arm64 dt in the other. These changes goes
in through different trees.
At present, Bindings, DTS and drivers are three series. Do you mean to 
put Bindings and drivers together? If so, checkpatch.pl will report a 
warning.
quoted
quoted
Best regards,
Krzysztof
.
.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help