On Fri 05 Aug 2022 at 17:39, Yu Tu [off-list ref] wrote:

Hi Krzysztof,
    Thank you for your reply.

On 2022/8/5 17:16, Krzysztof Kozlowski wrote:

quoted

[ EXTERNAL EMAIL ]
On 05/08/2022 10:57, Yu Tu wrote:

quoted

Added information about the S4 SOC PLL Clock controller in DT.

Signed-off-by: Yu Tu <redacted>
---
  arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ff213618a598..a816b1f7694b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi

@@ -92,6 +92,14 @@ apb4: apb4@fe000000 {
  			#size-cells = <2>;
  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
  +			clkc_pll: pll-clock-controller@8000 {

Node names should be generic - clock-controller.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

I will change to clkc_pll: clock-controller@8000, in next version.

Same comment applies to the binding doc.

Also it would be nice to split this in two series.
Bindings and drivers in one, arm64 dt in the other. These changes goes
in through different trees.

quoted

Best regards,
Krzysztof
.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel