Aw: Re: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
From: Frank Wunderlich <hidden>
Date: 2022-08-27 09:15:12
Also in:
linux-devicetree, linux-phy, linux-rockchip, lkml
Gesendet: Samstag, 27. August 2022 um 10:56 Uhr Von: "Krzysztof Kozlowski" [off-list ref]
On 27/08/2022 11:50, Frank Wunderlich wrote:quoted
Hiquoted
Gesendet: Freitag, 26. August 2022 um 08:50 Uhr Von: "Krzysztof Kozlowski" [off-list ref] On 25/08/2022 22:38, Frank Wunderlich wrote:quoted
From: Frank Wunderlich <redacted>quoted
quoted
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 93d383b8be87..40b90c052634 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts@@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys { vin-supply = <&dc_12v>; }; + pcie30_avdd0v9: pcie30-avdd0v9 {Use consistent naming, so if other nodes have "regulator" suffix, use it here as well.only these 3 new have the suffix: vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator vcc3v3_minipcie: vcc3v3-minipcie-regulator vcc3v3_ngff: vcc3v3-ngff-regulator so i would drop it there... so i end up with (including existing ones to compare): vcc3v3_sys: vcc3v3-sys vcc5v0_sys: vcc5v0-sys pcie30_avdd0v9: pcie30-avdd0v9 pcie30_avdd1v8: pcie30-avdd1v8 vcc3v3_pi6c_05: vcc3v3-pi6c-05 vcc3v3_minipcie: vcc3v3-minipcie vcc3v3_ngff: vcc3v3-ngff vcc5v0_usb: vcc5v0_usb vcc5v0_usb_host: vcc5v0-usb-host vcc5v0_usb_otg: vcc5v0-usb-otg is this ok? maybe swap avdd* and pcie30 part to have voltage in front of function.I prefer all of them have regulator suffix. I think reasonable is also to rename the old ones and then add new ones with suffix.
ok, will change these to add -regulator in name (not label). and then rename the others in separate Patch outside of the series.
so basicly here
- pcie30_avdd0v9: pcie30-avdd0v9 {
+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
- pcie30_avdd1v8: pcie30-avdd1v8 {
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
how about the swapping of pcie30 and the avddXvY? In Schematic they are named PCIE30_AVDD_0V9 / PCIE30_AVDD_1V8, so better leave this?
avdd0v9-pcie30 will be more similar to the other regulators, but inconsistent with Schematic.
regards Frank
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel