On 27/08/2022 11:50, Frank Wunderlich wrote:

Hi

quoted

Gesendet: Freitag, 26. August 2022 um 08:50 Uhr
Von: "Krzysztof Kozlowski" [off-list ref]
On 25/08/2022 22:38, Frank Wunderlich wrote:

quoted

From: Frank Wunderlich <redacted>

quoted

quoted

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 93d383b8be87..40b90c052634 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts

@@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};

+	pcie30_avdd0v9: pcie30-avdd0v9 {

Use consistent naming, so if other nodes have "regulator" suffix, use it
here as well.

only these 3 new have the suffix:

vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator
vcc3v3_minipcie: vcc3v3-minipcie-regulator
vcc3v3_ngff: vcc3v3-ngff-regulator

so i would drop it there...

so i end up with (including existing ones to compare):

vcc3v3_sys: vcc3v3-sys
vcc5v0_sys: vcc5v0-sys
pcie30_avdd0v9: pcie30-avdd0v9
pcie30_avdd1v8: pcie30-avdd1v8
vcc3v3_pi6c_05: vcc3v3-pi6c-05
vcc3v3_minipcie: vcc3v3-minipcie
vcc3v3_ngff: vcc3v3-ngff
vcc5v0_usb: vcc5v0_usb
vcc5v0_usb_host: vcc5v0-usb-host
vcc5v0_usb_otg: vcc5v0-usb-otg

is this ok?

maybe swap avdd* and pcie30 part to have voltage in front of function.

I prefer all of them have regulator suffix. I think reasonable is also
to rename the old ones and then add new ones with suffix.


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel