On Tue, 2 Nov 2021, Pali Rohár wrote:
So the conclusion is that there is also some RESET configuration via
BootCS (I have no idea what it is or was). And default value (when RESET
configuration is not used) is always "Memory controller" due to
existence of "broken PC BIOSes" (probably x86).
BootCS is one of the chip selects for the memory/device bus (AD bus), one
of the three (or four in dual-PCI implementations), along with the SysAD
bus and the PCI bus(es), interconnected, which is where DRAM sits as well
as possibly other locally accessed devices with the Galileo system
controllers. See Figure 5 on page 23 of the GT-64111 document.
Maciej
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel