Re: [PATCH] PCI: Marvell: Update PCIe fixup
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: 2021-11-02 15:02:51
Also in:
linux-mips, linux-pci, lkml
On Tue, Nov 02, 2021 at 11:00:34AM +0100, Pali Rohár wrote:
quoted
quoted
But I do not have this hardware to verify it.I still have a few Cobalt systems here.Perfect! It would help if you could provide 'lspci -nn -vv' output from that system. In case you have very old version of lspci on that system you could try to run it with '-xxxx' (or '-xxx') which prints hexdump and I can parse it with local lspci.
not sure, if you still needed: root@raq2:~# lspci -nn -vv 00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:4146] (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 0 Region 1: Memory at 08000000 (32-bit, non-prefetchable) [size=128M] Region 2: Memory at 1c000000 (32-bit, non-prefetchable) [size=32M] Region 3: Memory at 1f000000 (32-bit, non-prefetchable) [size=16M] Region 4: Memory at 14000000 (32-bit, non-prefetchable) [size=4K] Region 5: I/O ports at 4000000 [disabled] [size=4K] root@raq2:~# lspci -xxxx 00:00.0 Host bridge: Marvell Technology Group Ltd. Device 4146 (rev 11) 00: ab 11 46 41 06 00 80 a2 11 00 80 05 08 40 00 00 10: 00 00 00 00 00 00 00 08 00 00 00 1c 00 00 00 1f 20: 00 00 00 14 01 00 00 14 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel