Thread (13 messages) flat view 13 messages, 4 authors, 2021-09-06

Re: [PATCH] arm64: dts: sun50i: h5: NanoPI Neo 2: phy-mode rgmii-id

From: Clément Bœsch <hidden>
Date: 2021-08-30 21:25:28
Also in: linux-sunxi, lkml

On Mon, Aug 30, 2021 at 10:49:37PM +0200, Jernej Škrabec wrote:
Hi!
Hi,
Dne ponedeljek, 30. avgust 2021 ob 17:16:45 CEST je Clément Bœsch napisal(a):
quoted
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") network is broken on the NanoPi Neo 2.

This patch changes the phy-mode to use internal delays both for RX and
TX as has been done for other boards affected by the same commit.

Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
This commit fixes DT issue, so "fixes" tag should be:
Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes")

Here, a node with wrong phy-mode property was added to NanoPi Neo 2 board DT.  
Shouldn't I add it instead of replacing? I followed what I observed in
`git log --grep bbc4d71d63` where all the commits pretty much follow this
pattern: that commit is the one causing the actual observed regression,
while 44a94c7ef989 is much older, and while it's wrong, it wasn't causing
an issue in practice.

Or did I misunderstand something?
Other than that, this patch is fine and once fixes tag is fixed, you can add:
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

For next version, you should:
- change fixed tag
- add my review-by tag right above your signed-off-by tag
- mark patch as v2 (add "-v2" parameter to git format-patch)
- describe change right under "---" line
Will do.
Note, if you borked something when sending, you should mark patch or patch 
series as "RESEND", so recipients don't look for changes in two subsequent e-
mails (--subject-prefix="RESEND PATCH").
Not sure I follow you so before I disturb everyone with more noise I'd
just like to confirm: you mean a git send-email in-reply-to=[broken patch
attempt] (the one where I borked the --cc), right? But with what patch?
I'm a bit confused here.
Thanks for the fix!
No problem; I really think a scan of all the other boards would be
meaningful though, it looks like a lot of them got fixed but there are
many other candidates and the issue feels pretty critical to me
(regression, and no network at all).

-- 
Clément B.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help