Re: [v4,7/7] thermal: mediatek: use spinlock to protect PTPCORESEL

On Tue, 2020-07-07 at 10:13 +0200, Daniel Lezcano wrote:

On 05/06/2020 05:50, Michael Kao wrote:

quoted

On Fri, 2020-05-22 at 17:36 +0200, Daniel Lezcano wrote:

quoted

On 23/03/2020 13:15, Michael Kao wrote:

quoted

From: "michael.kao" <redacted>

The driver of thermal and svs will use the
same register for the project which should select
bank before reading sensor value.

Here there is a design problem AFAICT. The sensor should not be using
external locks.

The PTPCORESEL is a common register used by svs and thermal.
The thermal need to ensure PTPCORESEL register will not be changed by
svs when thermal switch bank to read raw data of temperature.
So we use svs_lock to make sure there is no conflict between the two
drivers.

Why not use regmap ?

Hi Daniel,

We are not sure the regmap can solve the problem.
The regmap can lock CORESELECT. But it can not protect 
the other sensors registers which thermal controller start to
read temperature need to access.

After internal disscussion, we don't have this kind of experience to
use regmap to protect some peice of code.
We will do some research of this kind of usage.
Thanks for your suggestion.

quoted

quoted

quoted

Signed-off-by: Michael Kao <redacted>
---
 drivers/thermal/mtk_thermal.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 9eaca432920e..594ad4f0f8cd 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c

@@ -22,6 +22,7 @@
 #include <linux/thermal.h>
 #include <linux/reset.h>
 #include <linux/types.h>
+#include <linux/power/mtk_svs.h>
 
 /* AUXADC Registers */
 #define AUXADC_CON1_SET_V	0x008

@@ -262,7 +263,7 @@ struct mtk_thermal {
 	struct clk *clk_peri_therm;
 	struct clk *clk_auxadc;
 	/* lock: for getting and putting banks */
-	struct mutex lock;
+	unsigned long flags;
 
 	/* Calibration values */
 	s32 adc_ge;

@@ -561,7 +562,7 @@ static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
 	u32 val;
 
 	if (mt->conf->need_switch_bank) {
-		mutex_lock(&mt->lock);
+		mt->flags = claim_mtk_svs_lock();
 
 		val = readl(mt->thermal_base + PTPCORESEL);
 		val &= ~0xf;

@@ -581,7 +582,7 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
 	struct mtk_thermal *mt = bank->mt;
 
 	if (mt->conf->need_switch_bank)
-		mutex_unlock(&mt->lock);
+		release_mtk_svs_lock(mt->flags);
 }
 
 /**

@@ -938,8 +939,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	mutex_init(&mt->lock);
-
 	mt->dev = &pdev->dev;
 
 	auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel