[v4,1/7] arm64: dts: mt8183: add thermal zone node
From: Michael Kao <hidden>
Date: 2020-03-23 12:16:47
Also in:
linux-mediatek
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
From: "michael.kao" <redacted> Add thermal zone node to Mediatek MT8183 dts file. Evaluate the thermal zone every 500ms while not cooling and every 100ms when passive cooling is performed. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Michael Kao <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 84 ++++++++++++++++++++++++ 1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 433c62efab2d..59f97217aaa8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -638,6 +638,86 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8183-thermal"; + reg = <0 0x1100b000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_THERM>, + <&infracfg CLK_INFRA_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; + polling-delay = <500>; + thermal-sensors = <&thermal 0>; + sustainable-power = <5000>; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>;
@@ -648,6 +728,10 @@ compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x11f10000 0 0x1000>; + + thermal_calibration: calib@180 { + reg = <0x180 0xc>; + }; }; mfgcfg: syscon@13000000 {
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel