[v4,0/7] Add Mediatek thermal dirver and dtsi

This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.

Rebase to kernel-5.6-rc1.

Update content:

[1/7]
    - Squash thermal zone settings in the dtsi from [v3,5/8]
      arm64: dts: mt8183: Increase polling frequency for CPU thermal zone

    - Remove the property of interrupts and mediatek,hw-reset-temp

[2/7]
    - Correct commit message

[4/7]
    - Change the target temperature to the 80C and change the commit message

[6/7]
    - Adjust newline alignment

    - Fix the judgement on the return value of registering thermal zone

This patch series base on these patches [1].

[v7,3/3] PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/11439829/)

Matthias Kaehlcke (1):
  arm64: dts: mt8183: Configure CPU cooling

Michael Kao (6):
  arm64: dts: mt8183: add thermal zone node
  arm64: dts: mt8183: add dynamic power coefficients
  arm64: dts: mt8183: Add #cooling-cells to CPU nodes
  thermal: mediatek: mt8183: fix bank number settings
  thermal: mediatek: add another get_temp ops for thermal sensors
  thermal: mediatek: use spinlock to protect PTPCORESEL

 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 156 +++++++++++++++++++++++
 drivers/thermal/mtk_thermal.c            |  88 +++++++++++--
 2 files changed, 231 insertions(+), 13 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel