[PATCH v3 1/4] media: dt-bindings: media: i2c: Switch to assigned-clock-rates
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2020-03-13 21:12:51
Also in:
linux-devicetree, linux-media, linux-renesas-soc, lkml
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Use assigned-clock-rates to specify the clock rate. Also mark clock-frequency property as deprecated. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- Documentation/devicetree/bindings/media/i2c/ov5645.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index 72ad992..e62fe82 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt@@ -8,7 +8,7 @@ Required Properties: - compatible: Value should be "ovti,ov5645". - clocks: Reference to the xclk clock. - clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. +- clock-frequency (deprecated): Frequency of the xclk clock. - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds to the hardware pin PWDNB which is physically active low. - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +37,8 @@ Example: clocks = <&clks 200>; clock-names = "xclk"; - clock-frequency = <24000000>; + assigned-clocks = <&clks 200>; + assigned-clock-rates = <24000000>; vdddo-supply = <&camera_dovdd_1v8>; vdda-supply = <&camera_avdd_2v8>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel