RE: [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound window setup routines | linux-arm-kernel

quoted

Hi Lorenzo,

Thanks a lot for your comments!

-----Original Message-----
From: Lorenzo Pieralisi <redacted>
Sent: 2019年6月29日 0:42
To: Z.q. Hou <zhiqiang.hou@nxp.com>
Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
[off-list ref]; catalin.marinas@arm.com; will.deacon@arm.com;
Mingkai Hu [off-list ref]; M.h. Lian [off-list ref];
Xiaowei Bao [off-list ref]
Subject: Re: [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound
window setup routines

On Fri, Apr 12, 2019 at 08:36:06AM +0000, Z.q. Hou wrote:
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Outbound window routine:
 - Remove unused var definitions and register read operations.
 - Add the upper 32-bit cpu address setup of the window.
 - Instead of blindly write, only change the fields specified.
 - Mask the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.

Inbound window routine:
 - Add parameter 'u64 cpu_addr' to specify the cpu address
   of the window instead of using 'pci_addr'.
 - Change 'int pci_addr' to 'u64 pci_addr', and add setup
   of the upper 32-bit PCI address of the window.
 - Move the PCIe PIO master enablement to mobiveil_host_init().
 - Instead of blindly write, only change the fields specified.
 - Mask the lower bits of window size in case override the
   control bits.
 - Check if the passing window number is available, instead of
   the total number of the initialized windows.
 - And add the statistic of initialized inbound windows.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <redacted>
---
V5:
 - Corrected and retouched the subject and changelog.

 drivers/pci/controller/pcie-mobiveil.c | 70
+++++++++++++++-----------
 1 file changed, 42 insertions(+), 28 deletions(-)
There are two things to be done here:

1) Separate fixes from refactoring
2) Each fix should be standalone and solve one problem only

The commit log is a list of changes, some of which I can't parse.

You should split this patch as described above and repost it separately but
first I will try to merge what I can from this series, do not repost as yet.
Yes, will split it.

Thanks,
Zhiqiang
 
Thanks,
Lorenzo

diff --git a/drivers/pci/controller/pcie-mobiveil.c
b/drivers/pci/controller/pcie-mobiveil.c
index e88afc792a5c..4ba458474e42 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -65,9 +65,13 @@
 #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0,
win)
 #define  WIN_ENABLE_SHIFT		0
 #define  WIN_TYPE_SHIFT			1
+#define  WIN_TYPE_MASK			0x3
+#define  WIN_SIZE_SHIFT			10
+#define  WIN_SIZE_MASK			0x3fffff

 #define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0,
win)
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win)
	PAB_EXT_REG_ADDR(0x80a0, win)
 #define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
 #define  AXI_WINDOW_ALIGN_MASK		3

@@ -82,8 +86,10 @@
 #define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0,
win)
 #define  AMAP_CTRL_EN_SHIFT		0
 #define  AMAP_CTRL_TYPE_SHIFT		1
+#define  AMAP_CTRL_TYPE_MASK		3

 #define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0,
win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)
	PAB_EXT_REG_ADDR(0xb4a0, win)
 #define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4,
win)
 #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8,
win)
 #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac,
win)
@@ -455,49 +461,51 @@ static int mobiveil_pcie_parse_dt(struct
mobiveil_pcie *pcie)  }

 static void program_ib_windows(struct mobiveil_pcie *pcie, int
win_num,
-			       int pci_addr, u32 type, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
-	int pio_ctrl_val;
-	int amap_ctrl_dw;
+	u32 value;
 	u64 size64 = ~(size - 1);

-	if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) {
+	if (win_num >= pcie->ppio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max inbound windows reached !\n");
 		return;
 	}

-	pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
-	pio_ctrl_val |= 1 << PIO_ENABLE_SHIFT;
-	csr_writel(pcie, pio_ctrl_val, PAB_PEX_PIO_CTRL);
-
-	amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-	amap_ctrl_dw |= (type << AMAP_CTRL_TYPE_SHIFT) |
-			(1 << AMAP_CTRL_EN_SHIFT) |
-			lower_32_bits(size64);
-	csr_writel(pcie, amap_ctrl_dw, PAB_PEX_AMAP_CTRL(win_num));
+	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 <<
AMAP_CTRL_EN_SHIFT) |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));

 	csr_writel(pcie, upper_32_bits(size64),
 		   PAB_EXT_PEX_AMAP_SIZEN(win_num));

-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, lower_32_bits(cpu_addr),
+		   PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+	csr_writel(pcie, lower_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
+	csr_writel(pcie, upper_32_bits(pci_addr),
+		   PAB_PEX_AMAP_PEX_WIN_H(win_num));

-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
-	csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
+	pcie->ib_wins_configured++;
 }

 /*
  * routine to program the outbound windows
  */
 static void program_ob_windows(struct mobiveil_pcie *pcie, int
win_num,
-			       u64 cpu_addr, u64 pci_addr,
-			       u32 config_io_bit, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {

-	u32 value, type;
+	u32 value;
 	u64 size64 = ~(size - 1);

-	if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) {
+	if (win_num >= pcie->apio_wins) {
 		dev_err(&pcie->pdev->dev,
 			"ERROR: max outbound windows reached !\n");
 		return;
@@ -507,10 +515,12 @@ static void program_ob_windows(struct
mobiveil_pcie *pcie, int win_num,
 	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
 	 * to 4 KB in PAB_AXI_AMAP_CTRL register
 	 */
-	type = config_io_bit;
 	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-	csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
-		   lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
+	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT |
+		 WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));

 	csr_writel(pcie, upper_32_bits(size64),
PAB_EXT_AXI_AMAP_SIZE(win_num));

@@ -518,11 +528,10 @@ static void program_ob_windows(struct
mobiveil_pcie *pcie, int win_num,
 	 * program AXI window base with appropriate value in
 	 * PAB_AXI_AMAP_AXI_WIN0 register
 	 */
-	value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num));
-	csr_writel(pcie, cpu_addr & (~AXI_WINDOW_ALIGN_MASK),
+	csr_writel(pcie, lower_32_bits(cpu_addr) &
(~AXI_WINDOW_ALIGN_MASK),
 		   PAB_AXI_AMAP_AXI_WIN(win_num));
-
-	value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));

 	csr_writel(pcie, lower_32_bits(pci_addr),
 		   PAB_AXI_AMAP_PEX_WIN_L(win_num)); @@ -604,6 +613,11
@@ static
int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	value |= APIO_EN_MASK;
 	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);

+	/* Enable PCIe PIO master */
+	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
+	value |= 1 << PIO_ENABLE_SHIFT;
+	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
 	/*
 	 * we'll program one outbound window for config reads and
 	 * another default inbound window for all the upstream traffic @@
-616,7 +630,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));

 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE,
IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE,
+IB_WIN_SIZE);

 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry(win, &pcie->resources) {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help