Bjorn/ZQ,


On Tue, Mar 12, 2019 at 2:48 PM Z.q. Hou [off-list ref] wrote:

Hi Bjorn,

Thanks a lot for your comments!

quoted

-----Original Message-----
From: Bjorn Helgaas [mailto:helgaas@kernel.org]
Sent: 2019年3月11日 22:14
To: Z.q. Hou <zhiqiang.hou@nxp.com>
Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
robh+dt@kernel.org; mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
shawnguo@kernel.org; Leo Li [off-list ref];
lorenzo.pieralisi@arm.com; catalin.marinas@arm.com;
will.deacon@arm.com; Mingkai Hu [off-list ref]; M.h. Lian
[off-list ref]; Xiaowei Bao [off-list ref]
Subject: Re: [PATCHv4 11/28] PCI: mobiveil: only fix up the Class Code field

On Mon, Mar 11, 2019 at 09:31:23AM +0000, Z.q. Hou wrote:

quoted

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Fix up the Class Code to PCI bridge, do not change the Revision ID.
And move the fixup to mobiveil_host_init function.

Add parens after function name.

Please explain why this change is needed.  Does it fix a bug?

Does this fix the problem that the PCI core didn't correctly identify the device
as a bridge because it identified bridges by class code instead of header type?

That problem *should* be fixed by b2fb5cc57469 ("PCI: Rely on config space
header type, not class code"), which is now upstream.

You might still want this class code change so that lspci shows the correct
thing.  That's fine, but the changelog should say why we're doing it.

Subrahmanya's original patch is to fixup 'Class Code' field, but it also fixed the 'Revision ID' field. This patch is patch is to remove the fixup of 'Revision ID' field.

it was introduced during the test with 4.9 and 4.15 linux version,
without this fix driver was not getting loaded.

I belive it should be sufficient to mention in code comment:  "Fixing
the class code as hardware is not reflecting the correct class code",
And the changelog for this patch mentioning "avoid changing the
revision ID  during the class code fix". Is that OK?

Thanks,

quoted

quoted

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver")

Make this "Fixes:" line a single line again.

quoted

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <redacted>
---
V4:
 - no change

 drivers/pci/controller/pcie-mobiveil.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c

b/drivers/pci/controller/pcie-mobiveil.c
index 78e575e71f4d..8eee1ab7ee24 100644

--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c

@@ -653,6 +653,12 @@ static int mobiveil_host_init(struct mobiveil_pcie

*pcie)

quoted

                               type, resource_size(win->res));
    }

+   /* fixup for PCIe class register */
+   value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
+   value &= 0xff;
+   value |= (PCI_CLASS_BRIDGE_PCI << 16);
+   csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
+
    /* setup MSI hardware registers */
    mobiveil_pcie_enable_msi(pcie);

@@ -896,9 +902,6 @@ static int mobiveil_pcie_probe(struct

platform_device *pdev)

quoted

            goto error;
    }

-   /* fixup for PCIe class register */
-   csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS);
-
    /* initialize the IRQ domains */
    ret = mobiveil_pcie_init_irq_domain(pcie);
    if (ret) {
--
2.17.1

Thanks,
Zhiqiang

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel