Thread (55 messages) 55 messages, 5 authors, 2019-03-29

[PATCHv4 15/28] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional

From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
Date: 2019-03-11 09:32:28
Also in: linux-devicetree, linux-pci, lkml
Subsystem: open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Change the "gpio_slave" and "apb_csr" to optional, the "gpio_slave"
is not used in current code, and "apb_csr" is not used by some
platforms.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Acked-by: Subrahmanya Lingappa <redacted>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <redacted>
---
V4:
 - no change

 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index a618d4787dd7..64156993e052 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -10,8 +10,10 @@ Required properties:
 	interrupt source. The value must be 1.
 - compatible: Should contain "mbvl,gpex40-pcie"
 - reg: Should contain PCIe registers location and length
+	Mandatory:
 	"config_axi_slave": PCIe controller registers
 	"csr_axi_slave"	  : Bridge config registers
+	Optional:
 	"gpio_slave"	  : GPIO registers to control slot power
 	"apb_csr"	  : MSI registers
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help