[PATCH v3 10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs
flat view
STALE2827d
SUPERSEDED
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2019-01-21 11:23:36
Also in:
linux-devicetree, linux-usb
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Revision v3 of 3 in this series.
Revisions (3)
- v2 [diff vs current]
- v3 current
- v4 [diff vs current]
Reference the PHY nodes from the USB controller nodes. The USB3 host controller is wired to: * the first PHY of the COMPHY IP * the OTG-capable UTMI PHY The USB2 host controller is wired to: * the host-only UTMI PHY Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index aeb2681428b3..029d8e090cb7 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi@@ -347,6 +347,8 @@ marvell,usb-misc-reg = <&usb32_syscon>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; };
@@ -368,6 +370,8 @@ reg = <0x5e000 0x1000>; marvell,usb-misc-reg = <&usb2_syscon>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; };
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel