[PATCH v3 08/10] ARM64: dts: marvell: armada-37xx: fix USB2 memory region
flat view
STALE2824d
SUPERSEDED
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2019-01-21 11:23:34
Also in:
linux-devicetree, linux-usb
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Revision v3 of 3 in this series.
Revisions (3)
- v2 [diff vs current]
- v3 current
- v4 [diff vs current]
The specification splits the USB2 memory region into three sections: 1/ 0xD005E000-0xD005EFFF: USB2 Host Controller Registers 2/ 0xD005F000-0xD005F7FF: USB2 UTMI PHY Registers 3/ 0xD005F800-0xD005FFFF: USB2 Host Miscellaneous Registers Section 1/ belongs to the USB2 node but section 2/ belongs to the UTMI PHY node. Section 3/ can be accessed by both the USB controller and the PHY because of the miscaellaneous nature of the registers inside so a specific node will be created to cover the area and a handle to it will be added in both the USB controller and the PHY node. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index d6e548618a95..5cfd1b920f31 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi@@ -351,7 +351,7 @@ usb2: usb@5e000 { compatible = "marvell,armada-3700-ehci"; - reg = <0x5e000 0x2000>; + reg = <0x5e000 0x1000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel