[PATCH v3 03/10] usb: ehci-orion: avoid double PHY initialization
flat view
STALE2824d
SUPERSEDED
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2019-01-21 11:23:29
Also in:
linux-devicetree, linux-usb
Subsystem:
the rest, usb ehci driver, usb subsystem · Maintainers:
Linus Torvalds, Alan Stern, Greg Kroah-Hartman
Revision v3 of 3 in this series.
Revisions (3)
- v2 [diff vs current]
- v3 current
- v4 [diff vs current]
No need to initialize the PHY from the driver's probe. It is done by the core automatically and doing it twice would increment the phy->powercount counter to 2 instead of 1. During later suspend operation, the counter will be decremented to one, no phy->power_off() will occur and worse than that, the following phy->power_on() at resume time will also be skipped, failing the whole S2RAM operation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/usb/host/ehci-orion.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1ad72647a069..3109f082949e 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c@@ -257,15 +257,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) if (IS_ERR(priv->phy)) { err = PTR_ERR(priv->phy); if (err != -ENOSYS) - goto err_phy_get; - } else { - err = phy_init(priv->phy); - if (err) - goto err_phy_init; - - err = phy_power_on(priv->phy); - if (err) - goto err_phy_power_on; + goto err_dis_clk; } /*
@@ -297,19 +289,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_add_hcd; + goto err_dis_clk; device_wakeup_enable(hcd->self.controller); return 0; -err_add_hcd: - if (!IS_ERR(priv->phy)) - phy_power_off(priv->phy); -err_phy_power_on: - if (!IS_ERR(priv->phy)) - phy_exit(priv->phy); -err_phy_init: -err_phy_get: +err_dis_clk: if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); usb_put_hcd(hcd);
@@ -327,11 +312,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); - if (!IS_ERR(priv->phy)) { - phy_power_off(priv->phy); - phy_exit(priv->phy); - } - if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk);
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel