Re: [PATCH net-next 1/7] net: phy: Extract genphy_c45_read_abilities from marvell10g

On Fri, Jan 18, 2019 at 04:23:46PM +0100, Maxime Chevallier wrote:

Marvell 10G PHY driver has a generic way of initializing the supported
link modes by reading the PHY's C45 PMA abilities. This can be made
generic, since these registers are part of the 802.3 specifications.

This commit extracts the config_init link_mode initialization code from
marvell10g and uses it to introduce the genphy_c45_read_abilities
function.

Hi Maxime

I think the idea is good. I just have a few English language
issues/questions.

Capabilities is more often used than abilities. I just wondered if
abilities is taken from the 802.3 specifications?

Also, i wonder if we should include _pma_ in the name? At some point
we might want to do something similar for other sublayers.

+/**
+ * genphy_c45_read_abilities - read supported link modes from PMA
+ * @phydev: target phy_device struct
+ *
+ * Read the supported link modes from the PMA Status 2 (1.8) register. If bit
+ * 1.8.9 is set, the list of supported modes is completed with the values in the

completed is not the right word. 'is build using the values in the' ?

+ * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
+ * modes. If bit 1.11.14 is set, then the list is also completed with the modes

list is also extended with the modes

+ * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
+ * 5GBASET are supported.
+ */

Thanks
	Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel