Thread (22 messages) flat view 22 messages, 3 authors, 2019-02-07
STALE2735d

Revision v1 of 2 in this series.

Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH net-next 3/7] net: phy: Read 2.5G and 5G extended abilities

From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2019-01-18 15:24:21
Also in: lkml, netdev
Subsystem: ethernet phy library, networking drivers, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Register 1.21 "2.5G/5G PMA Extended abilities" contains the information
indicating whether or not 2.5GBASET and 5GBASET are supported by a PHY,
as per the 802.3bz specification.

If the bit 14 is set in the 1.11 "PMA Extended abilities" register, the
modes specified in the above-mentionned 1.21 register should be taken
into account.

This commit adds that logic into the genphy_c45_read_abilities function.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/phy/phy-c45.c | 14 ++++++++++++++
 include/uapi/linux/mdio.h |  6 ++++++
 2 files changed, 20 insertions(+)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 61ca4f89e94a..ee32eba3dc20 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -377,6 +377,20 @@ int genphy_c45_read_abilities(struct phy_device *phydev)
 			__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
 				  supported);
 		}
+
+		if (val & MDIO_PMA_EXTABLE_NBT) {
+			val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_NG_EXTABLE);
+			if (val < 0)
+				return val;
+
+			if (val & MDIO_PMA_NG_EXTABLE_2_5GBT)
+				__set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+					  supported);
+			if (val & MDIO_PMA_NG_EXTABLE_5GBT)
+				__set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+					  supported);
+		}
 	}
 
 	linkmode_copy(phydev->supported, supported);
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index e2ab03606c1b..546509898867 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -45,6 +45,7 @@
 #define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
 #define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
 #define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PMA_NG_EXTABLE	21	/* 2.5G/5G PMA/PMD extended ability */
 #define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
 #define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
 #define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
@@ -201,6 +202,7 @@
 #define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
 #define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
 #define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+#define MDIO_PMA_EXTABLE_NBT		0x4000  /* 2.5/5GBASE-T ability */
 
 /* PHY XGXS lane state register. */
 #define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
@@ -272,6 +274,10 @@
 #define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
 #define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
 
+/* 2.5G/5G Extended abilities register. */
+#define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
+#define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */
+
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
 #define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-- 
2.19.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help