On 08/31/2017 01:16 PM, Scott Branden wrote:

Hi Eric,

mode is correct, location in file needs to be moved.


On 17-08-31 11:54 AM, Eric Anholt wrote:

quoted

This doesn't yet enable it on any particular platform, as we still
need a panel driver for bcm911360_entphn.

Signed-off-by: Eric Anholt <redacted>
---

These bits are just carving off a little bit of my 911360_entphn panel
series, to reduce conflicts when rebasing (which I just did for
testing pl111 changes for cygnus regressions).  I'm waiting to get my
current RPi panel driver in before working on the 911360 panel again.

  arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi

b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 7c957ea06c66..74f73ff24aec 100644

--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -575,6 +575,16 @@
              status = "disabled";
          };
  +        clcd: clcd at 180a0000 {

please place in correct address ordered location in file

I moved it right above the v3d node to keep the nodes ordered by unit
address, please check the result here:

https://github.com/Broadcom/stblinux/commit/4d1e42c6b9d28ce7b74d92258435f9d16834ae75

quoted

+            compatible = "arm,pl111", "arm,primecell";
+            reg = <0x180a0000 0x1000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "combined";
+            clocks = <&axi41_clk>, <&apb_clk>;
+            clock-names = "clcdclk", "apb_pclk";
+            status = "disabled";
+        };
+
          keypad: keypad at 180ac000 {
              compatible = "brcm,bcm-keypad";
              reg = <0x180ac000 0x14c>;

-- 
Florian