[PATCH 2/2] ARM: dts: Add the PWM node to Cygnus
From: scott.branden@broadcom.com (Scott Branden)
Date: 2017-08-31 20:10:25
Also in:
linux-devicetree, lkml
pwm node is correct. On 17-08-31 11:54 AM, Eric Anholt wrote:
This is connected up to the backlight on 911360_entphn, which we'll need for a panel driver. For now, leave the node disabled in the shared dtsi. Signed-off-by: Eric Anholt <redacted>
Acked-by: Scott Branden <scott.branden@broadcom.com>
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 74f73ff24aec..b9a654d733ae 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi@@ -585,6 +585,14 @@ status = "disabled"; }; + pwm: pwm at 180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + keypad: keypad at 180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>;