[PATCH 2/2] ARM: dts: Add the PWM node to Cygnus
From: Eric Anholt <hidden>
Date: 2017-08-31 19:00:33
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This is connected up to the backlight on 911360_entphn, which we'll need for a panel driver. For now, leave the node disabled in the shared dtsi. Signed-off-by: Eric Anholt <redacted> --- arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 74f73ff24aec..b9a654d733ae 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi@@ -585,6 +585,14 @@ status = "disabled"; }; + pwm: pwm at 180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + keypad: keypad at 180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>;
--
2.14.1