[PATCH v3 02/24] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
From: p.zabel@pengutronix.de (Philipp Zabel)
Date: 2017-01-13 11:58:25
Also in:
linux-devicetree, linux-media, lkml
Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam:
quoted hunk ↗ jump to hunk
Add to the MIPI CSI2 receiver node: compatible string, interrupt sources, clocks. Signed-off-by: Steve Longerbeam <redacted> --- arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 53e6e63..42926e9 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi@@ -1125,7 +1125,14 @@ }; mipi_csi: mipi at 021dc000 { + compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; + interrupts = <0 100 0x04>, <0 101 0x04>; + clocks = <&clks IMX6QDL_CLK_HSI_TX>, + <&clks IMX6QDL_CLK_VIDEO_27M>, + <&clks IMX6QDL_CLK_EIM_SEL>;
I think the latter should be EIM_PODF
+ clock-names = "dphy", "cfg", "pix";
and I'm not sure dphy is the right name for this one. Is that the pll ref input?
+ status = "disabled";
};
mipi_dsi: mipi at 021e0000 {regards Philipp