[PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver
From: linux@armlinux.org.uk (Russell King - ARM Linux)
Date: 2017-02-01 23:45:36
Also in:
linux-devicetree, linux-media, lkml
From: linux@armlinux.org.uk (Russell King - ARM Linux)
Date: 2017-02-01 23:45:36
Also in:
linux-devicetree, linux-media, lkml
On Fri, Jan 06, 2017 at 06:11:39PM -0800, Steve Longerbeam wrote:
+static int imxcsi2_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *sdformat)
+{
+ struct imxcsi2_dev *csi2 = sd_to_dev(sd);
+
+ sdformat->format = csi2->format_mbus;
+
+ return 0;
+}Hi Steve, This isn't correct, and I suspect the other get_fmt implementations are the same - I've just checked imx-csi.c, and that also appears to have the same issue. When get_fmt() is called with sdformat->which == V4L2_SUBDEV_FORMAT_TRY, you need to return the try format rather than the current format. See the second paragraph of Documentation/media/uapi/v4l/dev-subdev.rst's "Format Negotiation" section, where it talks about using V4L2_SUBDEV_FORMAT_TRY with both VIDIOC_SUBDEV_G_FMT and VIDIOC_SUBDEV_S_FMT. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.