[PATCH v3 00/24] i.MX Media Driver
From: linux@armlinux.org.uk (Russell King - ARM Linux)
Date: 2017-01-31 00:46:30
Also in:
linux-devicetree, linux-media, lkml
On Fri, Jan 06, 2017 at 06:11:18PM -0800, Steve Longerbeam wrote:
Philipp Zabel (3):
ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their
connections
add mux and video interface bridge entity functions
platform: add video-multiplexer subdevice driver
Steve Longerbeam (21):
[media] dt-bindings: Add bindings for i.MX media driver
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add media device
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
UAPI: Add media UAPI Kbuild file
media: Add userspace header file for i.MX
media: Add i.MX media core driver
media: imx: Add CSI subdev driver
media: imx: Add SMFC subdev driver
media: imx: Add IC subdev drivers
media: imx: Add Camera Interface subdev driver
media: imx: Add MIPI CSI-2 Receiver subdev driver
media: imx: Add MIPI CSI-2 OV5640 sensor subdev driver
media: imx: Add Parallel OV5642 sensor subdev driver
ARM: imx_v6_v7_defconfig: Enable staging video4linux driversHi, Trying this driver with an imx219 camera (which works with Philipp's driver) results in not much happening... no /dev/media* node for it, no subdevs, no nothing. No clues as to what's missing either. Only messages from imx-media are from registering the various subdevs. [ 37.444877] imx-media: Registered subdev imx6-mipi-csi2 [ 37.444973] imx-media: Registered subdev imx219 0-0010 [ 38.868740] imx-media: Registered subdev ipu1_ic_prpenc [ 38.869265] imx-media: Registered subdev ipu1_ic_prpvf [ 38.869425] imx-media: Registered subdev ipu1_ic_pp0 [ 38.870086] imx-media: Registered subdev ipu1_ic_pp1 [ 38.871510] imx-media: Registered subdev ipu2_ic_prpenc [ 38.871743] imx-media: Registered subdev ipu1_smfc0 [ 38.873043] imx-media: Registered subdev ipu1_smfc1 [ 38.873225] imx-media: Registered subdev ipu2_ic_prpvf [ 38.875027] imx-media: Registered subdev ipu2_smfc0 [ 38.875320] imx-media: Registered subdev ipu2_ic_pp0 [ 38.877148] imx-media: Registered subdev ipu2_smfc1 [ 38.877436] imx-media: Registered subdev ipu2_ic_pp1 [ 38.932089] imx-media: Registered subdev camif0 [ 38.956538] imx-media: Registered subdev camif1 [ 38.959148] imx-media: Registered subdev camif2 [ 38.964353] imx-media: Registered subdev camif3 [ 206.502077] imx-media: Registered subdev ipu1_csi0 [ 206.503304] imx-media: Registered subdev ipu1_csi1 [ 206.503814] imx-media: Registered subdev ipu2_csi0 [ 206.504281] imx-media: Registered subdev ipu2_csi1 I also get: [ 37.200072] imx6-mipi-csi2: data lanes: 2 [ 37.200077] imx6-mipi-csi2: flags: 0x00000200 and from what I can see, all modules from drivers/staging/media/imx/ are loaded (had to load imx-csi by hand because of the brokenness in the drivers/gpu/ipu code attaching an device_node pointer after registering the platform device, which changes what userspace sees in the modalias file.) Any clues at what to look at? -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.