On 01/04/2017 05:44 AM, Vladimir Zapolskiy wrote:

quoted

diff --git a/drivers/staging/media/imx/imx-csi.c b/drivers/staging/media/imx/imx-csi.c
new file mode 100644
index 0000000..975eafb
--- /dev/null
+++ b/drivers/staging/media/imx/imx-csi.c

@@ -0,0 +1,638 @@
+/*
+ * V4L2 Capture CSI Subdev for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2014-2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-ctrls.h>

Please add the headers alphabetically ordered.

done.

quoted

+
+static int csi_start(struct csi_priv *priv)
+{
+	int ret;
+
+	if (!priv->sensor) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return -EINVAL;
+	}
+
+	ret = csi_setup(priv);
+	if (ret)
+		return ret;
+
+	/* start the frame interval monitor */
+	ret = imx_media_fim_set_stream(priv->fim, priv->sensor, true);
+	if (ret)
+		return ret;
+
+	ret = ipu_csi_enable(priv->csi);
+	if (ret) {
+		v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
+		return ret;
+	}
+
+	return 0;

if (ret)
	v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);

return ret;

I failed to cleanup in this path, so it is now:

     ret = ipu_csi_enable(priv->csi);
     if (ret) {
         v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
         goto fim_off;
     }

     return 0;
fim_off:
     if (priv->fim)
         imx_media_fim_set_stream(priv->fim, priv->sensor, false);
     return ret;

quoted

+
+static int csi_link_setup(struct media_entity *entity,
+			  const struct media_pad *local,
+			  const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_subdev *remote_sd;
+
+	dev_dbg(priv->dev, "link setup %s -> %s", remote->entity->name,
+		local->entity->name);
+
+	remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+
+	if (local->flags & MEDIA_PAD_FL_SINK) {
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (priv->src_sd)
+				return -EBUSY;
+			priv->src_sd = remote_sd;
+		} else {
+			priv->src_sd = NULL;
+			return 0;

You can remove the return above.

right, fixed.

quoted

+
+	ret = v4l2_async_register_subdev(&priv->sd);
+	if (ret)
+		goto free_ctrls;
+
+	return 0;
+free_ctrls:
+	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+	return ret;

This is a functionally equal and simplified version:

if (ret)
	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);

return ret;

thanks, done.

quoted

+
+static struct platform_driver imx_csi_driver = {
+	.probe = imx_csi_probe,
+	.remove = imx_csi_remove,
+	.id_table = imx_csi_ids,
+	.driver = {
+		.name = "imx-ipuv3-csi",
+		.owner = THIS_MODULE,

Please drop .owner.

ok, I tested this and there are no regressions, done
for all modules.

Steve