On Tue, Jan 3, 2017 at 6:57 PM, Steve Longerbeam [off-list ref] wrote:

+       camera: ov5642 at 3c {
+               compatible = "ovti,ov5642";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ov5642>;
+               clocks = <&clks IMX6QDL_CLK_CKO>;
+               clock-names = "xclk";
+               reg = <0x3c>;
+               xclk = <24000000>;
+               DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+               AVDD-supply = <&vgen5_reg>;  /* 2.8v, rev C board is VGEN3
+                                               rev B board is VGEN5 */

Please use vgen3 so that by default we have the valid AVDD-supply for
revC boards which is more recent and more the users have access to.

+       mipi_camera: ov5640 at 3c {
+               compatible = "ovti,ov5640_mipi";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ov5640>;
+               reg = <0x3c>;
+               clocks = <&clks IMX6QDL_CLK_CKO>;
+               clock-names = "xclk";
+               xclk = <24000000>;
+               DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+               AVDD-supply = <&vgen5_reg>;  /* 2.8v, rev C board is VGEN3
+                                               rev B board is VGEN5 */

Same here.

+               pinctrl_ov5640: ov5640grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x80000000
+                               MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x80000000

Please avoid all the 0x80000000 IOMUX settings and replace them by
their real values.